1 Roll (305m) 16L Etched PTFE

305m low friction 1.34 mm ID PTFE tube suitable for pushrod outers on discus launched glider and other small models. Also suitable for a large range of engineering and industrial uses.

This tubing is specially etched on the outside, making it easily bondable using many adhesives, thin CA being probably the best. Provides the lightest, easiest, most friction-free pushrod installations possible.

16L Etched PTFE Tube Specification
Inside diameter	1.34 mm	0.053 in
Wall thickness	0.16 mm	0.006 in
Outside diameter	1.7 mm	0.067 in
Suggested inner	1mm Carbon Rod	18 SWG or thinner Piano or SS wire
US size	16 AWG L type (Lightweight)
Weight per m	1.7 g per meter
Length of tube	305 m
Number of joins	5 max