1 Roll (153m) 14L Etched PTFE

153m low friction 1.68 mm ID PTFE tube suitable for pushrod outers on F3J & F5J models, discus launched glider and other small models. Also suitable for a large range of engineering and industrial uses.

This tubing is specially etched on the outside, making it easily bondable using many adhesives, thin CA being probably the best. Provides the lightest, easiest, most friction-free pushrod installations possible.

14L Etched PTFE Tube Specification
Inside diameter	1.68 mm	0.066 in
Wall thickness	0.2 mm	0.008 in
Outside diameter	2.0 mm	0.079 in
3X Stretched ID	1.02 mm	0.040 in
Suggested inner	1mm & 1.3mm Carbon Rod	16 SWG or thinner Piano or SS wire
US size	14 AWG L type (Lightweight)
Weight per m	2.9 g per meter
Length of tube	153 m
Number of joins	5 max